The set of auto winch on the vehicle can not only save themselves in the difficult road sections, but also for other vehicles, artillery and equipment for rescue each other, in order to make automobile and its equipment pass difficult sections. The auto winch equipped in tractor can be divided into two types of mechanical car winch and hydraulic auto winch. Here is proper use of the auto winch described below:
Put rope
The auto winch can be torn off the set of drums, and in the absence of load pull rope by hand and pulled it firmly fixed in the material on. You can start the engine, take the power reverse bonding, and release rope from the auto winch.
Traction
Use hydraulic auto winch should first open the switch, and mount power, so make pump work (when the temperature is below -30 ℃, first make the pump run without load 10 to 15 minutes). When the pump of auto winch speed increase to a certain speed (such as the Steyr vehicle speed pump in 1600 ~ 2000 r / min), the manipulation of the handle will pull the control valve to the "twisted tight" condition position, start pulling.
When using the auto winch to self-help, you should join a file transmission to take full advantage of vehicle traction, and make the car more smoothly self-help.
When using the auto winch to self-help, you should join a file transmission to take full advantage of vehicle traction, and make the car more smoothly self-help.
Closing rope
When the traction or self-help used auto winch has been completed, the wire rope should be straightened, and add some of the load. Make the wire rope neatly wrapped around the rope on the drums, so as not to affect the next time you use the auto winch.
When the traction or self-help used auto winch has been completed, the wire rope should be straightened, and add some of the load. Make the wire rope neatly wrapped around the rope on the drums, so as not to affect the next time you use the auto winch.